HONEYWELL Q7800A 1005 base plate / wiring base

BASEPLATE / WIRING BASE / BASE PLATE HONEYWELL FOR 7800

– 22 TERMINAL
– SIDE ACCESS HOLES FOR ELECTRICAL VOLTAGE CHECKS

FOR USE WITH :
– 7800 SERIES RELAY MODULES
– S7830A1005

DESCRIPTION

The wiring base S98 is equipped with screw terminals and
provides utmost flexibility of electrical wiring due to its
variety of cable entry points.

CONSTRUCTIONAL FEATURES
– 3 earth terminals with additional terminal for burner
earthing
– 3 neutral terminals with internal permanent connection
to neutral terminal: • terminal 8 (S98)
• terminal 7 (S98 N7)
– 2 spare auxiliary terminals (S1 and S2)
– 3 extra terminals A, B and C (S98-12-pin only)
– 2 slide-in plates and 2 easy-knockout holes, plus 2 easy?knockout holes in the bottom of the base faciliate the wiring.
The digital burner control boxes should be installed on S 98
12-pin wiring bases, which features beside the extra terminals
B and C – to be used by some controls only – the extra
terminal A for the remote reset/lockout function.

Note:

To assist trouble free operation the main neutral
connection terminal in the wiring base – which is
also the connection to the control box – must be
fully tightened.
The terminal screws are already in their open
position and have only to be tightened after the
wire has been put into the termial

NOTE:

Produk yang telah dikirim dapat dikembalikan atau ditukar apabila memenuhi Syarat & Ketentuan berikut:

1.barang yg dikirim beda spek dari iklan

2.barang yg dikirim beda spek dari order

3.barang yg dikirim beda merek

Produk tidak dapat dikembalikan apabila:

1.terjadi salah order oleh pembeli (salah merek / salah spek)

2.hanya karena sudah tidak membutuhkan lagi barang yg telah diorder

3.tidak mencantumkan video unboxing yang utuh (wajib tanpa potongan dan wajib tanpa editing)

4.pembeli salah pilih barang karena ketidaktahuan/coba2

5.terjadi kesalahan kirim oleh penjual tetapi pembeli merusak barang/dus produk