SIEMENS LGK16.635A17 / LGK16.635A27 burner control original

SIEMENS LGK16.635A17 110V
SIEMENS LGK16.635A27 230V burner control original

Burner controls
? For gas, oil or dual-fuel forced draft burners of medium to high capacity
? For multistage or modulating burners in continuous operation
? With air pressure supervision for checked air damper control.
? Flame supervision
– LOK16: With silicon detector RAR
– LGK16: With flame detector QRA53/QRA55/ionization probe
? Burner control for oil burners or gas burners in accordance with EN 298:2012
? Suitable for use with air heaters (WLE)
? With self-checking flame signal amplifier
The LOK16…/LGK16… and this Data Sheet are intended for use by OEMs which
integrate the burner controls in their products.

Use
Burner controls type LOK16…/LGK16… feature a self-checking flame supervision
circuit.
The flame supervision circuit initiates the safety actions in the case of… :
• … premature or missing flame signal
• … any kind of fault on the flame detector, the detector cables or the flame signal
amplifier that could simulate a flame signal during burner operation
The burner controls are therefore suited for use in all types of oil- or gas-fired
combustion plant where self-checking flame supervision systems are either mandatory
or recommended.

For example:
– Burners that operate continuously
– Burners in intermittent operation that, in the case of great heat demand, may
operate continuously for more than 14 hours, e.g. in plant using boiler sequencing
– Burners that need to comply with the German TRD 411 and TRD 412 regulations
for steam boilers
– Burners in plant where, for specific safety requirements, supervision of the burner
by a self-checking flame supervision system seems advisable
– The control sequence and connection circuitry of the LOK16…/LGK16… burner
controls are identical to those of the LAL2… and LFL1… respectively (with the
exception of the LFL1.148), so that existing combustion plant can also be equipped
with self-checking burner controls,
? provided very

NOTE:

Produk yang telah dikirim dapat dikembalikan atau ditukar apabila memenuhi Syarat & Ketentuan berikut:

1.barang yg dikirim beda spek dari iklan

2.barang yg dikirim beda spek dari order

3.barang yg dikirim beda merek

Produk tidak dapat dikembalikan apabila:

1.terjadi salah order oleh pembeli (salah merek / salah spek)

2.hanya karena sudah tidak membutuhkan lagi barang yg telah diorder

3.tidak mencantumkan video unboxing yang utuh (wajib tanpa potongan dan wajib tanpa editing)

4.pembeli salah pilih barang karena ketidaktahuan/coba2

5.terjadi kesalahan kirim oleh penjual tetapi pembeli merusak barang/dus produk