SUNTEC AJV6AC 1000 4P oil pump

SKU: 1730027970912290476 Kategori: Brand:

SUNTEC AJV6AC 1000 4P oil pump

This is a general specification leaflet; for specific applications not covered
herein, contact Suntec.
The SUNTEC AJ oil pump is the basic model incorporating a pressure regulating
valve with cut-off*.
APPLICATIONS
– Light oil.
– One or two-pipe system.
– Normally associated with in-line solenoid valve.
SPECIAL FEATURES OF THE REVISION “4”
– Reduced internal pressure losses.
– Sealing at inlet and return ports on the spot face with a washer.

PUMP OPERATING PRINCIPLE
The gear set draws oil from the tank through the built-in filter and transfers it to the
valve that regulates the oil pressure to the nozzle line. All oil that does not go through
the nozzle line will be by-passed through the valve back to the return line in two pipe
installation or, if it is a one-pipe installation, back to the suction port in the gear-set;
in that case, the by-pass plug must be removed from the vacuum gauge port and the
return port sealed by steel plug and washer.
The valve also has a cut-off function* as follows :
During starting period when the gear-set speed is increasing, all the oil passes
through a bleed slot in the piston, back to the return. Once the speed reaches a certain
value and the flow can no longer pass through this bleed slot, then the pressure
increases rapidly overcoming the valve spring force and opens the valve.
During the stop sequence, the gear-set speed slows down and the valve closes when
the gear-set capacity is lower than the bleed slot flow.
The cut-on and cut-off speeds depend on the gear-set size and set pressure.
Bleed :
Bleeding in two pipe operation is automatic, but it may be accelerated by loosening
the plug in a pressure gauge port.
In one pipe operation, a pressure port must be opened to bleed the system.

NOTE:

Produk yang telah dikirim dapat dikembalikan atau ditukar apabila memenuhi Syarat & Ketentuan berikut:

1.barang yg dikirim beda spek dari iklan

2.barang yg dikirim beda spek dari order

3.barang yg dikirim beda merek

Produk tidak dapat dikembalikan apabila:

1.terjadi salah order oleh pembeli (salah merek / salah spek)

2.hanya karena sudah tidak membutuhkan lagi barang yg telah diorder

3.tidak mencantumkan video unboxing yang utuh (wajib tanpa potongan dan wajib tanpa editing)

4.pembeli salah pilih barang karena ketidaktahuan/coba2

5.terjadi kesalahan kirim oleh penjual tetapi pembeli merusak barang/dus produk

Berat 1900 kg

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “SUNTEC AJV6AC 1000 4P oil pump”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

Brand

Memuat brand...

Categories

Memuat kategori...

Ketikkan kata kunci untuk mulai mencari produk...
Scroll to Top