SATRONIC ZT 931 IGNITOR
For power gas burners of unlimited rating.
With plug-in ignition and power supply cables,
designed to fit beneath the burner safety
control box
INTRODUCTION
The ZT 931 high frequency ignition transformer is suitable
for use with power gas burners of unlimited rating. The
ZT 931 enables a big spark deformation on burners with
a high fire-rating or high combustion-air velocity. In addition
to this, it generates the lowest electromagnetic interferren?ces of all known electronic ignition devices, which is especially
important if the burner has to comply with EN 55014. The
ZT 931 combines a low power consumption with a low
inrush current. The power connector is compatible with the
widely used 3-wire connector. A replacement with a plugable
coil trafo is therefore possible without any problems.
CONSTRUCTIONAL FEATURES
A transistorised oscillator produces a high frequency voltage,
which is then increased to 14 kV by a conventional iron?cored transformer. Despite the very compact dimensions of
the ZT 931 ignition device, it has an outstanding performance
in comparison to conventional stray field ignition transfor?mers. The high frequency voltage produces an interrupting
arc with high thermal energy and ideal ignition properties.
The dimensions of the housing and fixing holes are such
that it can be mounted underneath the burner control box
wiring base. The power supply for the ZT 931 is provided in
the form of a 3 pin AMP type socket connection with a
corresponding plug and cable supplied.
In order to meet all likely requirements, the ZT 931 is
available in 2 versions:
– ZT 931 4.0 mm pin to suit standard ignition cable
connectors, e.g. for pre-assembled “Teflon” H.T. cables.
– ZT 931 1.0 mm pin to suit 7.0 mm silicon H.T. cable in
conjunction with the Satronic clip.
TECHNICAL DATA
Supply voltage 220 / 240 V (-15… +10%)
50 Hz (40 – 60 Hz)
Connections:
Live / neutral / earth 3 AMP plug type terminals
6.30 x 0.8 mm
High tension ø 4 mm pin or ø 1 mm pin
Primary current 0.25 A
Rating Intermittent,
33 % E.D. in 3 minutes
Interference level
Kebijakan Pengembalian & Penukaran Barang
?
Produk yang telah dikirim dapat dikembalikan atau ditukar apabila memenuhi syarat & ketentuan berikut:
– Produk yang diterima berbeda spesifikasi dari yang tertera di iklan
– Produk yang dikirim tidak sesuai dengan pesanan (beda tipe/spesifikasi)
– Produk yang dikirim berbeda merek dari yang dipesan
Produk tidak dapat dikembalikan apabila:
– Terjadi kesalahan pemesanan oleh pembeli (misalnya salah memilih merek atau spesifikasi)
– Barang sudah tidak dibutuhkan lagi setelah dipesan
– Tidak disertakan video unboxing secara utuh, tanpa potongan dan tanpa editing (wajib)
– Pembeli salah pilih produk karena ketidaktahuan atau coba-coba
– Terjadi kesalahan pengiriman oleh penjual, namun barang atau dus produk sudah dirusak oleh pembeli
Ulasan
Belum ada ulasan.