SIEMENS LDU11.523 burner control original per pcs

SIEMENS LDU11.523A17 , LDU11.523A27 burner control original

The LDU11… valve proving system is designed for use with shutoff valves in connection
with gas burners and gas appliances. In the event of inadmissible leakage,
the system prevents the burner from starting up.
The LDU11… system conforms to the requirements of EN1643 covering automatic
shutoff valves for use with gas burners and gas appliances to EN161.
The LDU11… and this Data Sheet are intended for use by OEMs which integrate the
valve proving system in their products.
The LDU11… is designed for automatic gas valve proving (leakage test) based on the
pressure proving principle. It is for use on gas-fired combustion plant with or without vent
pipe to atmosphere. In the case of plants with no vent pipe where EN standards apply,
the notes given in «Connection examples without vent pipe to atmosphere» must be
observed.
Used in connection with 1 or 2 commercially available pressure switches, valve proving is
automatically initiated with every burner startup, either
– prior to burner startup
– during the prepurge time if it lasts a minimum of 60 seconds
– immediately after a controlled shutdown, or
– on completion of the burner control’s control sequence, e.g. at the end of the postpurge
time
The valve proving test is based on the 2-stage pressure proving principle :
1. The valve on the mains side is tested by evacuating the test space and by monitoring
the atmospheric pressure in it.
2. The valve on the burner side is checked by pressurizing the test space and by monitoring
the gas pressure.

Kebijakan Pengembalian & Penukaran Barang

Produk yang telah dikirim dapat dikembalikan atau ditukar apabila memenuhi syarat & ketentuan berikut:

1. Produk yang diterima berbeda spesifikasi dari yang tertera di iklan.
2. Produk yang dikirim tidak sesuai dengan pesanan (beda tipe/spesifikasi).
3. Produk yang dikirim berbeda merek dari yang dipesan.

Produk tidak dapat dikembalikan apabila:

1. Terjadi kesalahan pemesanan oleh pembeli (misalnya salah memilih merek atau spesifikasi).
2. Barang sudah tidak dibutuhkan lagi setelah dipesan.
3. Tidak disertakan video unboxing secara utuh, tanpa potongan dan tanpa editing (wajib).
4. Pembeli salah pilih produk karena ketidaktahuan atau coba-coba.
5. Terjadi kesalahan pengiriman oleh penjual, namun barang atau dus produk sudah dirusak oleh pembeli.