SIEMENS LGB22.330A17 / LGB22.330A27 original 110V/220V

SIEMENS LGB22.330A17 110V SIEMENS LGB22.330A27 220V

Burner controls for the supervision, startup and control of 1- or 2-stage gas burners. As well as for gas burners / oil burners of small to medium capacity (typically up to 350 kW), with or without fan in intermittent operation. The LGB and this Data Sheet are intended for use by OEMs which integrate the burner controls in their products! The LGB burner controls are used for the startup and supervision of 1- or 2-stage gas or gas / oil burners in intermittent operation. Depending on the type of burner control used, the flame is supervised either by an ionization probe, a blue-flame detector QRC1 for forced draft gas / oil burners, or a UV detector QRA (with auxiliary unit AGQ1.xA27). Using the appropriate adapter, the LGB can replace the predecessor types LFI7 and LFM1 in terms of function (refer to Replacement types under Ordering). ? Applications in accordance with EN 676: Automatic forced draft burners for liquid fuels ? Type-tested and approved in accordance with EN 298:1994-02 or EN 298:1993 The burner controls are of plug-in design, suitable for installation in any position on burners, in control cabinets or on control panels. The housing is made of impact-proof, heat-resistant and flame-retarding plastic. It is of plug-in design (measuring 91 x 62 x 63 mm, including the base) and engages audibly in the base. The color of plastic material of burner controls LGB are executed in black. The housing accommodates the – programming mechanism with the synchronous motor – electronic flame signal amplifier (ionization) with the flame relay and the other switching devices – lockout reset button with its integrated fault indication lamp

NOTE:

Produk yang telah dikirim dapat dikembalikan atau ditukar apabila memenuhi Syarat & Ketentuan berikut:

1.barang yg dikirim beda spek dari iklan

2.barang yg dikirim beda spek dari order

3.barang yg dikirim beda merek

Produk tidak dapat dikembalikan apabila:

1.terjadi salah order oleh pembeli (salah merek / salah spek)

2.hanya karena sudah tidak membutuhkan lagi barang yg telah diorder

3.tidak mencantumkan video unboxing yang utuh (wajib tanpa potongan dan wajib tanpa editing)

4.pembeli salah pilih barang karena ketidaktahuan/coba2

5.terjadi kesalahan kirim oleh penjual tetapi pembeli merusak barang/dus produk