Kawat las tig inconel 625

Merek : DAIKO
Type : SF 625
kode aws : A5.14 ERNiCrMo-3
Diameter : 1,6 mm / 2,4 mm / 3,2 mm
Panjang : 1 meter
berat : 5 kg / box

APPLICATIONS Welding of Alloys 625 at working temperature from –269°C to above 1000°C.
Suitable for welding heat resisting alloys as Inconel 601 (except severe sulphidising
conditions), Incoloy 800/800H or combinations of these with other alloys for power
generation and petrochemical plants and furnace equipment.
Also suitable for overmatching corrosion-resistant welds in Alloy 825, 6%Mo superaustenitic
stainless 254SMo, Alloy 28, 904L, Hastelloy G and G3, and for overlays on
valves, pumps and shafts, often in marine and offshore equipment where high pitting
resistance (PRE=50) and tolerance to weld metal dilution is required.
Welds in high strength ferrous alloys including cryogenic 9% Ni steels and for reclamation
of dies when rapid toughness and work-hardening are needed.

TYPICAL PROPERTIES tensile strength 750 N/mm2
“AS WELDED” 0,2% proof stress 500 N/mm2
elongation on 4D. 38%
impact energy at -196°C = 80J
PRE 50
hardness “as welded” 250 HV
hard drawn hardness 450 HV