SIEMENS LGK16.333A17 / LGK16.333A27 burner control original

SIEMENS LGK16.333A17 110V SIEMENS LGK16.333A27 220V Burner controls ? For gas, oil or dual-fuel forced draft burners of medium to high capacity ? For multistage or modulating burners in continuous operation ? With air pressure supervision for checked air damper control. ? Flame supervision – LOK16: With silicon detector RAR – LGK16: With flame detector QRA53/QRA55/ionization probe ? Burner control for oil burners or gas burners in accordance with EN 298:2012 ? Suitable for use with air heaters (WLE) ? With self-checking flame signal amplifier The LOK16…/LGK16… and this Data Sheet are intended for use by OEMs which integrate the burner controls in their products. Use Burner controls type LOK16…/LGK16… feature a self-checking flame supervision circuit. The flame supervision circuit initiates the safety actions in the case of… : • … premature or missing flame signal • … any kind of fault on the flame detector, the detector cables or the flame signal amplifier that could simulate a flame signal during burner operation The burner controls are therefore suited for use in all types of oil- or gas-fired combustion plant where self-checking flame supervision systems are either mandatory or recommended. For example: – Burners that operate continuously – Burners in intermittent operation that, in the case of great heat demand, may operate continuously for more than 14 hours, e.g. in plant using boiler sequencing – Burners that need to comply with the German TRD 411 and TRD 412 regulations for steam boilers – Burners in plant where, for specific safety requirements, supervision of the burner by a self-checking flame supervision system seems advisable – The control sequence and connection circuitry of the LOK16…/LGK16… burner controls are identical to those of the LAL2… and LFL1… respectively (with the exception of the LFL1.148), so that existing combustion plant can also be equipped with self-checking burner controls, ? provided very good flame detector curr

Kebijakan Pengembalian & Penukaran Barang

Produk yang telah dikirim dapat dikembalikan atau ditukar apabila memenuhi syarat & ketentuan berikut:

1. Produk yang diterima berbeda spesifikasi dari yang tertera di iklan.
2. Produk yang dikirim tidak sesuai dengan pesanan (beda tipe/spesifikasi).
3. Produk yang dikirim berbeda merek dari yang dipesan.

Produk tidak dapat dikembalikan apabila:

1. Terjadi kesalahan pemesanan oleh pembeli (misalnya salah memilih merek atau spesifikasi).
2. Barang sudah tidak dibutuhkan lagi setelah dipesan.
3. Tidak disertakan video unboxing secara utuh, tanpa potongan dan tanpa editing (wajib).
4. Pembeli salah pilih produk karena ketidaktahuan atau coba-coba.
5. Terjadi kesalahan pengiriman oleh penjual, namun barang atau dus produk sudah dirusak oleh pembeli.